34
troublesHootInG
Checking the receiver Collar
The only way to be certain your
system is working properly is by
checking the receiver collar. If
everything appears to be normal
at the transmitter, you can check
the receiver collar outside at the
line, usually in the driveway.
Take the receiver collar off your
pet, snap the buckle together and
hold the collar by the snapped
buckle. Let the receiver hang
down (as if the dog were in it)
about knee high, yellow or blue
sticker forward or up with posts
closest to the rear. You should
start hearing the tone 2 to 3 feet
before the wire. If you have to get
closer than that, you may have to
turn up the range control on the
transmitter.
If you still do not get any signal,
take the battery out for 30 seconds
and replace it
(+ positive side
up)
and try again. If still no
signal, check when the battery
was last replaced. If still no results,
check the receiver at the face of
the transmitter. If it beeps at the
transmitter but not in the yard,
call your local dealer.
Содержание DG-9XT
Страница 1: ...Customer s Manual Equipment Pet Training Troubleshooting www dogguard com Revised Jan 2013...
Страница 17: ...17 They ll love you more for providing structure in their lives and keeping them safe Training Your Pets...
Страница 44: ...www dogguard com Revised Jan 2013 We re Here to Help...