Doepke DSU 8plus, Инструкция по установке и эксплуатации

Страница: 25 / 32

If the input signal exceeds this threshold, the unit sends a "1" signal over
the Dupline bus on the previously set address:
» LOW: 20 V AC/DC
» HIGH: 190 V AC/DC.
Setting is performed as follows:
Selection Description
1.
S e t - u p
� I n p u t s �
① ② ③ ④
» Select the menu item indi-
cated alongside by pressing
① or ④.
» Skip to the submenu by
pressing ② or ③.
2.
S e t - u p
� S w . T h r e s h o l d �
① ② ③ ④
» Select the menu item indi-
cated alongside by pressing
① or ④.
» Skip to the submenu by
pressing ② or ③.
3.
T h r e s h o l d I 1 :
� H i g h �
① ② ③ ④
» Press ① or ④ to select the
input whose threshold you
want to change.
» By pressing ② or ③ you can
then change the threshold to
“high” or “low”.
» Continue this step until all the
inputs have been set up.
4.
S a v e s e t t i n g s ?
� y e s n o �
① ② ③ ④
» Select the menu item
indicated alongside
by pressing ① or ④.
» Press ② to save your
changes.
» Press ③ to discard your
changes.
DE EN
25