When installing please comply with the wiring diagram. All leads to
be connected must be dead. The table below shows the terminal
assignments:
Termi-
nal
Description
Termi-
nal
Description
1.1/1.5
Input signal 1 (I1)
1.2/1.6
Input signal 5 (I5)
2.1/2.5
Input signal 2 (I2)
2.2/2.6
Input signal 6 (I6)
3.1/3.5
Input signal 3 (I3)
3.2/3.6
Input signal 7 (I7)
4.1/4.5
Input signal 4 (I4)
4.2/4.6
Input signal 8 (I8)
1.3
Dupline signal
conductor (-)
1.7
Dupline signal
conductor (+)
1.4
Operating voltage
0 V DC
1.8
Operating voltage
+24 V DC
Connections between the Dupline signal and the 24 V supply, or
connections to earth potential, will cause malfunctions and are not
permissible. Check that the polarity of the supply voltage and the
Dupline signal is correct.
When connecting the components, ensure that the maximum torque at
the clamps does not exceed 0.6 Nm.
4. Commissioning and configuring
To ensure successful commissioning, please perform the following
steps in the order in which they are listed below:
5. Familiarise yourself with how to operate the unit: see below
6. Configure the system settings:
see below
7. Configure the addresses of the inputs:
see page 21
8. Configure the switching thresholds of the inputs: see page 21
Please also note the overview of the menu structure on page 27.
DE EN
21
Содержание DSU 8plus
Страница 18: ...18 Doepke...
