30
STARTING AND OPERATING
Activating SSC
Once SSC is enabled it will activate
automatically once the following conditions are
met:
The driver releases the throttle.
The driver releases the brake.
The transmission is in any selection other
than PARK.
Your vehicle speed is below 20 mph
(32 km/h).
The set speed for SSC is selectable by the
driver, and can be adjusted by using the paddle
shifters or the gear shift (+/-) on the steering
wheel. Additionally, the SSC set speed may be
reduced when climbing a grade and the level of
set speed reduction depends on the magnitude
of grade. The following summarizes the SSC set
speeds:
SSC Target Set Speeds
1st = 0.6 mph (1 km/h)
2nd = 1.2 mph (2 km/h)
3rd = 1.8 mph (3 km/h)
4th = 2.5 mph (4 km/h)
5th = 3.1 mph (5 km/h)
6th = 3.7 mph (6 km/h)
7th = 4.3 mph (7 km/h)
8th = 5 mph (8 km/h)
REVERSE = 0.6 mph (1 km/h)
NEUTRAL = 1.2 mph (2 km/h)
PARK = SSC remains enabled but not active
NOTE:
During SSC, the (+/-) gear selector input is
used for SSC target speed selection but will
not affect the gear chosen by the transmis
-
sion. While actively controlling SSC, the trans
-
mission will shift appropriately for the
driver-selected set speed and corresponding
driving conditions.
SSC operation is influenced if one of the drive
modes are active. The differences may be
notable to the driver as a varying level of
aggressiveness.
Driver Override
The driver may override SSC activation with
throttle or brake application at any time.
Deactivating SSC
SSC will be deactivated but remain available if
any of the following conditions occur:
The driver overrides SSC set speed with
throttle or brake application.
The vehicle speed exceeds 20 mph
(32 km/h) but remains below 40 mph
(64 km/h).
The vehicle is shifted into PARK.
21_DT_TRX_SU_EN_USC_t.book Page 30