98
SERVICING AND MAINTENANCE
Engine Air Cleaner Filter Selection
The quality of replacement filters varies
considerably. Only high quality Mopar certified
filters should be used.
Beauty Cover Removal/Installation
The engine beauty cover will need to be
removed in order to service the engine air
cleaner filter or to gain better access to the
engine compartment.
Beauty Cover Removal
1. Lift up on the front two corners of the
beauty cover to unseat rubber ball socket
fasteners.
Beauty Cover
2. Pull the cover forward to release rear guides
from rubber grommets to remove from the
vehicle.
Beauty Cover Attachment Points
Beauty Cover Installation
1. Install the rear guide posts into the rubber
grommets.
2. Push down on the front to seat the two
rubber ball sockets in the front of the cover.
WARNING!
The air induction system (air cleaner, hoses,
etc.) can provide a measure of protection in
the case of engine backfire. Do not remove
the air induction system (air cleaner, hoses,
etc.) unless such removal is necessary for
repair or maintenance. Make sure that no
one is near the engine compartment before
starting the vehicle with the air induction
system (air cleaner, hoses, etc.) removed.
Failure to do so can result in serious personal
injury.
1 — Rear Grommets
2 — Front Ball Socket Fasteners
21_DT_TRX_SU_EN_USC_t.book Page 98