Dodge Challenger 2015, Руководство по эксплуатации

Страница: 151 / 689

•
Forward Collision Warning — If
Equipped
The Front Collision Warning (FCW) feature pro-
vides an audible and/or visual warning to poten-
tial forward collisions. The feature can be can
be set to Far, or set to Near. The default status
of FCW is the Far setting. This means the
system will warn you of a possible collision with
the vehicle in front of you when you are farther
away. This gives you the most reaction time. To
change the setting for more dynamic driving,
select the Near setting. This warns you of a
possible collision when you are much closer to
the vehicle in front of you. To change the FCW
status, press and release the “Near” or “Far”
button. Then press the back arrow button on the
touchscreen.
For further information, refer to “Adaptive
Cruise Control (ACC)” in “Understanding The
Features Of Your Vehicle”.
•
Steering Feel Options — If Equipped
When your vehicle is not equipped with Perfor-
mance Control, the Steering Feel Options fea-
ture will allow you to adjust the steering effort
and feel. Press the “Sport” button on the touch-
screen to provide the greatest amount of steer-
ing feel, requiring the highest amount of steer-
ing effort. Press the “Normal” button on the
touchscreen to provide greater steering feel,
requiring greater steering effort. Press the
“Comfort” button on the touchscreen to provide
a balance of steering feel and steering effort.
Press the back arrow button on the touchscreen
to return to the previous menu.
•
ParkSense®
The ParkSense® system will scan for objects
behind the vehicle when the transmission shift
lever is in REVERSE and the vehicle speed is
less than 11 mph (18 km/h). It will provide an
alert (audible and/or visual) to indicate the prox-
imity to other objects. The system can be en-
abled with Sound Only, or Sound and Display.
To change the ParkSense® status, press and
release the “Sound Only” or “Sound and Dis-
play” button. Then press the back arrow button
on the touchscreen. Refer to “ParkSense®” in
“Understanding The Features Of Your Vehicle”
for system function and operating information.
•
Rear ParkSense® Chime Volume
The Rear ParkSense® Chime Volume settings
can be selected from the DID or Uconnect®
System — if equipped. The chime volume set-
tings include LOW, MEDIUM, and HIGH. The
factory default volume setting is MEDIUM. To
make your selection, press the “ParkSense®
Rear Chime Volume” button on the touch-
screen, until a check-mark appears next to
setting, indicating that the setting had been
selected. Press the back arrow button on the
touchscreen to return to the previous menu.
ParkSense® will retain its last known configu-
ration state through ignition cycles.
•
Blind Spot Alert
When this feature is selected, the Blind Spot
Alert feature Provides alerts, visual and/or au-
dible, to indicate objects in your blind spot. The
Blind Spot Alert feature can be activated in
“Lights” mode. When this mode is selected, the
Blind Spot Monitor (BSM) system is activated
and will only show a visual alert in the exterior
mirrors. When “Lights & Chime” mode is acti-
vated, the Blind Spot Monitor (BSM) will show a
visual alert in the exterior mirrors as well as an
148