Turning Cargo Camera On Or Off — With Uconnect® 8.4A/8.4AN
1. Press the “Controls” button located on the bottom of the Uconnect
®
display.
2. Press the “Cargo Camera” button to turn the Cargo Camera system ON.
NOTE:
The Cargo Camera image may be deactivated by touching the Uconnect
®
display. The
previous selected screen will appear.
WARNING!
• The pickup box is intended for load carrying purposes only, not for passengers,
who should sit in seats and use seat belts.
• Care should always be exercised when operating a vehicle with unrestrained
cargo. Vehicle speeds may need to be reduced. Severe turns or rough roads may
cause shifting or bouncing of the cargo that may result in vehicle damage. If wide
building materials are to be frequently carried, the installation of a support is
recommended. This will restrain the cargo and transfer the load to the pickup box
floor.
• If you wish to carry more than 600 lbs (272 kg) of material suspended above the
wheelhouse, supports must be installed to transfer the weight of the load to the
pickup box floor or vehicle damage may result. The use of proper supports will
permit loading up to the rated payload.
• Unrestrained cargo may be thrown forward in an accident causing serious or
fatal injury.
Cargo Camera Display
U T I L I T Y
164