Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 726

Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 80

Regular Cab models have two tether anchorages, one
each behind the front center and right seats. Quad Cab

威

,

Mega Cab

威

and Crew Cab models have three anchor-

ages, one behind each of the rear seats.

WARNING!

An incorrectly anchored tether strap could lead to
seat failure and injury to the child. In a collision, the
seat could come loose and allow the child to crash
into the inside of the vehicle or other passengers, or
even be thrown from the vehicle. Use only the anchor
positions directly behind the child seat to secure a
child restraint top tether strap. Follow the instruc-
tions below. See your authorized dealer for help if
necessary.

Tether Anchorage Points At The Right And Center
Front Seat (Regular Cab - All Seats)

1. Place the child restraint on the seat and adjust the
tether strap so that it will reach over the seat back under
the head restraint to the tether anchor directly behind the
seat.

2. Lift the cover (if so equipped), and attach the hook to
the square opening in the sheet metal.

3. Install the child restraint and remove the slack in the
tether strap according to the manufacturer’s instructions.

78

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
78
79
80
81
82
...
»

Содержание 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов