Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 611 | Manualshive

Страница: 611 / 726

Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 611

Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use only tow bars and other
equipment designed for the purpose, following equip-
ment manufacturer’s instructions. Use of safety chains is
mandatory. Attach a tow bar or other towing device to
main structural members of the vehicle, not to bumpers
or associated brackets. State and local laws applying to
vehicles under tow must be observed.

If you must use the accessories (wipers, defrosters, etc.)
while being towed, the ignition must be in the ON/RUN
position, not the ACC position.

If the vehicle’s battery is discharged, see “Shift Lever
Override” in “What To Do In Emergencies” for instruc-
tions on shifting the automatic transmission out of the
PARK position for towing.

CAUTION!

Do not attempt to use sling type equipment when
towing. When securing the vehicle to a flat bed truck,
do not attach to front or rear suspension components.
Damage to your vehicle may result from improper
towing.

6

WHAT TO DO IN EMERGENCIES

609

«
...
609
610
611
612
613
...
»

Содержание 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов