Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 572 | Manualshive

Страница: 572 / 726

Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 572

Shifting Into NEUTRAL (N) – Manual Shift
Transfer Case (If Equipped)

Use the following procedure to prepare your vehicle for
recreational towing.

WARNING!

You or others could be injured if you leave the
vehicle unattended with the transfer case in the
NEUTRAL (N) position without first fully engaging
the parking brake. The transfer case NEUTRAL (N)
position disengages both the front and rear drive-
shafts from the powertrain and will allow the vehicle
to move, even if the transmission is in PARK. The
parking brake should always be applied when the
driver is not in the vehicle.

CAUTION!

It is necessary to follow these steps to be certain that
the transfer case is fully in NEUTRAL (N) before
recreational towing to prevent damage to internal
parts.

1. Bring the vehicle to a complete stop.

2. Turn OFF the engine.

3. Press and hold the brake pedal.

4. Shift the transmission into NEUTRAL.

5. Shift the transfer case lever into NEUTRAL (N).

6. Start the engine.

7. Shift the transmission into REVERSE.

8. Release the brake pedal for five seconds and ensure
that there is no vehicle movement.

570

STARTING AND OPERATING

«
...
570
571
572
573
574
...
»

Содержание 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов