Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 726

Dodge 2012 Ram Truck Gas 1500 Скачать руководство пользователя страница 48

WARNING!

A frayed or torn belt could rip apart in a collision and
leave you with no protection. Inspect the belt system
periodically, checking for cuts, frays, or loose parts.
Damaged parts must be replaced immediately. Do
not disassemble or modify the system. Seat belt
assemblies must be replaced after a collision if they
have been damaged (bent retractor, torn webbing,
etc.) or if the air bag deployed.

Regular Cab Front Center Three Point Belt

1. The front center seat belt on the Regular Cab may be
disconnected to open up utilization of the storage areas
behind the front seats. The black latch plate can be
detached from the black keyed seat belt buckle located on
the inboard side of the passenger seat. Insert the seat belt
tongue into the center red slot on the black buckle. The
black buckle latch plate can be removed when the seat

belt tongue is pressed into the buckle. Allow the retractor
to take up the extra webbing, and the buckles will hang
vertically from the cab back exit bezel, thus freeing up all
the area behind the front seats.

2. To reattach the seat belt to the front center seat, pull
the black buckle latch plate forward from the cab back

Detaching Buckle With Seat Belt Tongue

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
46
47
48
49
50
...
»

Содержание 2012 Ram Truck Gas 1500























































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов