45
Be
fore
Us
ing
the
H
a
ndset
Use the Battery Pack SH20 exclusive to the FOMA terminal.
Turn off the power, close the FOMA terminal, and hold it in your both
hands before attaching or removing the battery pack.
The battery pack is not waterproof.
ɡ
Attaching battery pack
1
Remove the back cover (
n
P. 24).
2
Attach the battery pack.
:
The battery pack has tabs that make it easy to attach. Attach the
battery pack with a recycle mark side faced up.
3
Attach the back cover (
n
P. 24).
ɡ
Removing battery pack
1
Remove the back cover (
n
P. 24).
2
Remove the battery pack.
:
The battery pack has a “PULL” Tag that makes it easy to remove.
Hold the “PULL” Tag between the fingers and lift up it in the direction
of an arrow (45-degree from the FOMA terminal) to remove the
battery pack.
The battery pack is not fully charged at the time of purchase. Be
sure to charge the battery using the exclusive AC or DC adapter
(sold separately) before use.
It is recommended that the desktop holder be used for charging to
prevent water from seeping caused by forgetting to close the external
connector terminal cover (
n
P. 47).
The AC adapter and desktop holder are not waterproof. Never try to
charge the battery pack when the FOMA terminal is wet. For precautions
on the waterproof performance when charging
n
P. 27
Attaching/Removing battery pack
Face the side with a
recycle mark up
Battery pack connector terminal side
Battery pack
Tabs
Tabs
Using unnecessary force when attaching or removing the battery pack
may damage the connector terminal for the battery pack (charger
terminal) on the FOMA terminal.
Securely close the back cover. If not closed securely, the back cover
may come off and the battery pack may fall out due to vibration. May
damage the waterproof performance and allow water to seep.
Charging
“PULL” Tag
