Docomo P-01H, Инструкция по эксплуатации

Страница: 78 / 95

74
Other
s
Pressing keys is disabled.
…
Make sure Dial Lock is deactivated. (See
page 39)
…
Make sure Keypad Lock is deactivated.
(See page 39)
…
Make sure Side Key Guard is set to “OFF”.
The docomo mini UIM card is not
recognized.
…
Make sure you insert the docomo mini
UIM card in the correct direction. (See
page 21)
The clock does not show the correct time.
…
The clock may not show the correct
time when the power has been kept on
for a prolonged period of time. Check
whether “Auto time adjust” and “Auto time
difference” of “Set main time” have been
set to “Auto” and then, move to a location
with good signal reception, turn off the
power of FOMA terminal and then back
on.
Call
Cannot make a call by pressing numeric
keys.
…
Make sure Restrict Dialing is deactivated.
…
Make sure the lock for “Keypad dial” in
Original Lock is released. (See page 39)
…
Make sure Dial Lock is deactivated. (See
page 39)
…
Make sure Self Mode is deactivated.
Cannot talk.
(“ ” does not disappear even if you
move to another place.
You cannot make or receive a call, though
the radio wave conditions are not bad.)
…
Turn off and on the FOMA terminal, or
remove and attach/insert the battery pack
or docomo mini UIM card. (See page 21,
page 23)
…
Depending on the characteristics of the
radio waves, you may not be able to make
or receive a call even if the FOMA terminal
is “within service area” or “ ” is
displayed for a radio wave condition. Move
to another place and redial.
…
Make sure the call restrictions such as
Call Rejection, Call Acceptation, etc. are
deactivated.
…
Depending on the radio wave congestion
state, calls and mail messages may be
congested and hard to be connected
in crowded places. In that case, the
message “Please wait” or “Please wait
for a while” is displayed and a busy tone
sounds. Move to another place or wait for
a while, and then redial.
Camera
Still images and movies shot by the
camera are blurred.
…
When you shoot a subject in a short
distance, set Focus mode to “Macro”.
…
When you shoot portraits, set Focus mode
to “FaceDetect”.
…
Set Stabilizer to “Auto” and then shoot.
…
Make sure the lens of the camera is not
fogged or stained.
Osaifu-Keitai
Cannot use Osaifu-Keitai function.
…
If you remove the battery pack or activate
Omakase Lock, the IC card function
becomes unavailable regardless of the
setting of IC Card Lock. (See page 21, page
39)
…
Make sure IC Card Lock is deactivated.
(See page 39)
…
Make sure you place the
f
mark on the
FOMA terminal over the scanning device.
(See page 63)