Configuring Wi-Fi Settings
This terminal connects to the Internet via
access points for Wi-Fi networks or public
wireless LAN services.
To connect, you must configure the access
point connection settings on this terminal.
■ Reception interference caused by Bluetooth
devices
• As this terminal’s wireless LAN devices
and Bluetooth device use the same
frequency (2.4 GHz), reception interference
may occur or the communications speed
may lower. Also, you may hear noise or
have a connection problem. In these cases,
do the following:
- Keep the wireless LAN device over 10 m
away from the Bluetooth device.
- Within 10 m, turn off either the wireless
LAN device or the Bluetooth device.
Note
• Packet communication can be connected,
even when Wi-Fi function is ON. However,
while Wi-Fi is available, Wi-Fi is prioritized.
When the Wi-Fi network is disconnected,
this terminal automatically connects
to the LTE/3G/GPRS network. Packet
communication charges apply if you use
it with LTE/3G/GPRS connected.
• You can reduce battery consumption by
turning OFF Wi-Fi when you are not using it.
Wi-Fi network status
When this terminal is connected to a Wi-Fi
network,
appears in the status bar. An open
network with no security protection is detected
when Wi-Fi network notification is set to ON,
always appears in the status bar.
60
Confirmation and Settings before Using