Scheduled Update of Software
If you want to schedule the installation of the
update file for a different time, you can set the
software update time in advance.
a
Display the notice screen
u
"Sets
Time"
b
Enter the desired time
u
"OK"
When the scheduled time arrives
The installation screen is displayed at the
starting time, and the installation starts
automatically after approximately 10 seconds.
Note
• All key operations are disabled during the
update. The update cannot be stopped
either.
• In case installing the software is not
operated at the preset time, it starts again
at the same time on the following day.
• In case OS version is being upgraded, the
software update does not start even at
the preset time.
• In case alarm has been set at the same
time as the preset time, the software
update starts.
• In case L-04E is off at the preset time,
the software updates starts at the same
time after turning on.
• In case " The software update is
interrupted. Check the condition of this
terminal, and start again." is displayed on
the status bar during the software update,
check the condition is not following
conditions, and start the update again.
- No service
- Interference by other functions
- Insufficient memory of this terminal
- Insufficient battery
- Network error
- Write failure
273
Appendix / Index
Содержание optimus G pro L-04E
Страница 1: ...L 04E 13 3 INSTRUCTION MANUAL...