Docomo optimus G pro L-04E, Инструкция по эксплуатации

Страница: 189 / 309

Notes when holding over
reader, NFC Modules built-in
device, etc.
Keep in mind the following when holding the
terminal up to a reader.
• Do not strike the mark against the reader.
• Hold the mark parallel to the center of
reader.
• Bring the mark close to the device slowly.
• If the mark cannot be scanned even with
it held in front of the center of the scanner,
slightly lift up this terminal, or move it
backwards/forwards or to the left/right.
• When there is a metal object between
the mark and the device, reading may
fail. Note that putting this terminal into a
case or covering this terminal may affect
communication performance.
Locking Osaifu-Keitai
Use "NFC/Osaifu-Keitai" to lock the Osaifu-
Keitai service from being used.
Locking of Osaifu-Keitai is different from
screen lock and SIM card lock.
a From the Home screen, "Application"
u
"Osaifu-Keitai"
b "Lock Settings"
• When Osaifu-Keitai is initially locked,
the "Initial settings of lock password"
will be displayed. Follow the on-screen
instructions, and set the lock password
initial setting.
c Tap the "Password" field, and enter
password
d "OK"
Note
• While configuring "NFC/Osaifu-Keitai
lock", or are displayed on the status
bar.
• This cannot be unlocked even if the
power is shut off.
187
Application