Docomo LYNX SH-10B, Инструкция по эксплуатации

Страница: 37 / 311

e02_nb10_7e.fm
[35/42]
35
Continued on next page
Befor
e Using
the Hands
et
Before inserting or removing the UIM, turn off the power, position the
back facing upwards and remove the battery pack. Close and hold the
FOMA terminal securely with your both hands.
■ Inserting UIM
1
Hook a finger on the tab and pull out the tray (
1
)
:
Pull out the tray straight until it stops.
2
Hold the UIM with the IC (gold)
turned up and set on the tray (
2
)
3
Push the tray all the way in (
3
)
■ Removing UIM
1
Hook a finger on the tab, pull the tray out (
1
) and
remove the UIM (
2
)
:
Do not allow the UIM to fall when removing it.
The UIM has a “PIN code”.
[0000] is set at the time of subscription but you can change to a four- to
eight-digit number (
n
P. 69).
Use the Battery Pack SH24 exclusive to the FOMA terminal.
Perform with the FOMA terminal turned off and closed while holding with
your both hands.
■
Attaching battery pack
1
Push the catch on the back cover in the direction of
the arrow (
1
), slide approximately 3 mm (
2
) and
remove the back cover (
3
)
Inserting/Removing UIM
Notch
IC (gold)
2 3
Fit the notch of the UIM to that of
the tray.
1
Tab
Tray
1
2
Note that inserting or removing the UIM forcibly may damage the UIM
or deform the tray.
Refer to the UIM user’s guide for more information on the UIM.
Do not misplace the UIM once it is taken out.
When the tray falls off, slide the tray in straight along the guide rail.
Security codes
Attaching/Removing battery pack
1
2
3
nb10_e.book 35 ページ ２０１０年７月８日 木曜日 午前８時３３分