Docomo DM-01J, Инструкция по эксплуатации

Страница: 82 / 110

80
Handset Settings
You can print with an app supporting the print function by
installing a print app (plug-in). To change settings on the
installed print app (plug-in), carry out the following operations.
Install a print app (plug-in) supporting a printer to use in advance.
1
In the home screen, display the Apps Sheet
/
[Settings]
/
[Printing]
2
Select a print service
: Follow the instructions on the screen and operate after this
step.
You can check the information about the handset.
1
In the home screen, display the Apps Sheet
/
[Settings]
/
[About phone]
2
Select an item
Build number : Check the build number.
Status : Check the battery level, network in use, etc.
Adjust sensitivity of sensor : Adjust the accuracy of retrieval
by the motion sensor and geomagnetic sensor.
Software Update : For details
>
P. 95 “Software update”
Legal information : Check copyright notice, terms of service,
etc.
Authentication : Check information such as the certification of
conformity with technical regulations.
Model number : Check the model number.
Android version : Check the Android version.
Android security patch level : Check when the loaded security
patch is released.
Baseband version : Check the baseband version.
Kernel version : Check the kernel version.
Printing
About phone
[Adjust sensitivity of sensor]
Make the adjustment approximately 10 seconds after the
adjustment screen appears.
Adjustment may be failed depending on surroundings or other
simultaneously running apps. Change the place where you
make adjustment, end running apps, etc.
D２-01J_E.book 80 ページ ７年 月 日 木曜日 午後 時９分