Appendix/Index
182
■
Osaifu-Keitai
●
Osaifu-Keitai function is unavailable.
• When Omakase Lock is set,
appears on the status
bar and Osaifu-Keitai functions are unavailable
regardless of the NFC/Osaifu-Keitai lock settings.
• Is Lock NFC/Osaifu-Keitai activated?
• Do you place
mark of the terminal over IC card
reader?
→
■
Overseas use
●
Cannot use the terminal even when
is displayed
overseas.
Do you subscribe to WORLD WING? Check if you
subscribe to WORLD WING.
●
is displayed, and you cannot use the terminal
overseas.
• Are you at a location that is outside of the international
roaming service area, or where the signal is weak? See
NTT DOCOMO website to check if it is the available
service area or the available overseas network operator.
• Change network mode type to [4G/3G/GSM(Auto)].
→
• Set the network operator to [Select automatically].
→
• It may be recovered by turning the terminal OFF and
ON.
→
●
Cannot use the terminal suddenly while using overseas.
Does usage amount exceed the limit of maximum charges
for use? For use of International roaming (WORLD WING),
the limit of maximum charges for use is set in advance.
When it exceeds the limit of maximum charges for use,
pay the charges.
●
There is no incoming call overseas.
Is Incoming call restriction while roaming set to [Activate
restriction]?
→
●
No caller ID is notified/A notified caller ID is different
from that of the caller/Functions for using contents
saved in the phonebook or those using Caller ID
notification do not operate.
Even when a caller notifies its caller ID, it is not displayed
on the terminal unless notified from the network or
network operator used. And, a notified caller ID may be
different from that of the caller by some networks or
network operators you use.
●
Cannot perform data communication overseas.
Check the data roaming settings.
■
Data management
●
Data saved in microSD card is not displayed.
Reattach the microSD card.
→
●
Data transfer is not performed.
Do you use USB HUB? If you use USB HUB, operations
may not be performed correctly.
●
[No thumbnail] appears when displaying images/Gray
frame appears in the image list.
[No thumbnail] or a gray frame may appear if image data
is broken.
Содержание arrowsbe F-05J
Страница 1: ...F 05J INSTRUCTION MANUAL 17 5...
