96
Multimedia
Reset usage history
: Reset the TapFlow
UI history.
2
[
(
]
:
Shooting starts after the shooting start sound
is heard.
3
[
)
] to end shooting
:
After the shooting end sound, the shooting
stops.
:
When Auto Save is set to [ON], this
operation is completed.
4
[Save]
Set whether you save a shot still picture or a
shot moving picture automatically.
1
In the still picture shooting screen,
z
/
[Save settings]
/
[Auto Save]
:
When the video camera is on: In the moving
picture shooting screen,
z
/
[Auto Save].
2
Select the setting
You can use the camera to scan bar codes
(JAN/QR codes), and perform various
operations according to the contents of
scanned item.
JAN code
JAN code is a type of bar code using vertical
bars of varying width to express numbers.
The following code is read as [4942857119022].
JAN8 and JAN13 can be read.
QR code
QR code is a type of two-dimensional code
expressing data vertically and horizontally.
The following code is read as [
ڼٛ২
NTT
Ρ
κ
].
1
In the home screen, [
R
]
/
[Camera
Reader]
/
[Switch reader]
/
[Barcode]
:
To adjust the brightness: Slide up/down
2
Scan the bar code
The remaining time indicator is an
approximation. Shooting may continue longer
than the remaining time indicated before the
start of shooting or may automatically stop even
when there is remaining time.
The remaining time indicator changes
according to the available space in the microSD
Card and battery level.
Auto save settings
Camera reader
Barcode reader
