104
File Management
You can send and receive data with other FOMA
terminals equipped with iC communication function.
Make initial setting of Osaifu-Keitai in advance.
(
n
P. 115).
In the following cases, you cannot perform iC
communication.
During Offline mode
During Osaifu-Keitai lock
In the following cases, data may not be sent via
iC communication.
During a call
During charging
During earphone connection
During USB connection
For details on other data that can be sent and
received or various locked operations, refer to
“Infrared communication” (
n
P. 102).
ɡ
When using iC communication
Use while placing the
a
mark of receiver’s
FOMA terminal on that of sender’s FOMA
terminal as shown.
Do not move the FOMA terminal until sending
and receiving of data is completed.
There may be some cases in which data are
poorly sent and received or the screen is off by
positioning FOMA terminal near depending on
the other party’s terminal. In that case, put a
distance between the
a
marks apart/closer or
slide them up/down or to the left/right.
To enter authentication code is required for sending
and receiving all data items. The authentication code
is a password exclusively for iC communication.
Before starting data communication, the sender and
receiver must enter the same user-specified
four-digit code. In addition, to enter Lock No. is
required for sending and receiving all data items.
Insert a microSD Card in advance. However,
sending and receiving just single data may not
require the microSD Card.
ɡ
Sending data
Example: Phonebook
1
In the home screen, [
R
]
/
[Address
Book]
2
Touch a phonebook for a while
/
[Send IC]
/
[Yes]
3
Place the
a
mark on that of the
other party’s FOMA terminal
4
[OK]
ɡ
Receiving data
1
Place the
a
mark on that of the
other party’s FOMA terminal
iC communication
Using iC communication
mark
Sending and receiving by iC
