125
Overseas Use
Ʀ
While international roaming, [R] appears on the
upper left of the signal icon.
Connected operator can be checked in the status
panel.
Date & time
If [Automatic] of Date & time is enabled, the FOMA
terminal receives information with time and time
differences from overseas telecommunications
carrier, then time and time differences are
corrected.
Time differences may not be adjusted correctly
depending on overseas telecommunications
carrier. In such a case, set time zone manually.
The correction timing differs depending on the
telecommunications carrier.
For details on the Date & time
n
P. 84
Inquiries
When the FOMA terminal or the miniUIM is lost
or stolen overseas, promptly contact DOCOMO
and conduct a procedure for canceling the use of
service from your country of stay. Refer to the
back of this manual for inquiries. Note that
communication/calling charges after the FOMA
terminal or the miniUIM is lost or stolen are
incurred to the subscriber.
For land-line phone, etc., “International call
access number” of your country of stay or
“Universal number international prefix” is
required.
ɡ
Check after homecoming
The FOMA terminal automatically connects to the
FOMA network after homecoming. If it fails, perform
the following setting.
Set Network Mode to [3G/GSM(Auto)]
(
n
P. 125).
Set telecommunications carriers (
n
P. 125) to
[Select automatically].
1
In the home screen, [
R
]
/
[Settings]
/
[Wireless &
networks]
/
[Mobile networks]
2
Select an item
Data transmission
: Enable data
communication.
Data roaming
: Set to use packet
communication overseas.
Network Mode
: Set transmission method to
use.
Access Point Names
: Set an access point.
Network operators
: Search an available
network and set.
Settings to use overseas
