Looking at your Recorder
Display Window
- File Folder A
- File Folder B
- PC Link
- Timer
- Alarm
- Playback speaker
- Password protected
- New un-read message
- Battery indicator
- Voice Activated Recording
- Standard Play
- Long Play
- Blank : Record / Playback mode
- Spinning : Recording and during message playback
- Solid on : Standby mode and memory indicator
= Empty = Half full = Memory full
- Month digit
- Day digits
- Time digits
- 5 -
LP
SP
A B
A
B
F
LP
SP
M
D
AM
PM
AM
PM
M
D
F
Getting Started
Installing the Batteries
1. Slide down and lift the battery compartment cover.
2. Insert two (2) LR03 (size AAA) alkaline batteries with correct
polarity.
3. Replace the cover.
When the batteries are depleted, flashes.
Replace the batteries as soon as possible.
Battery life*
(See Page 25)
Replacing the Batteries
Do not use manganese batteries.
Do not mix old and new batteries, different types of batteries, or rechargeable
batteries of different capacities.
Note:
Replace new batteries within 3 minutes. Otherwise, current date and time setting
may be lost. You need to set the date and time again. However, the recorded
messages will retain.
If you do not plan to use the recorder for a long time, remove batteries.
Batteries can leak chemicals that destroy parts.
1. To turn on the unit, press and hold the
POWER
button until unit beeps and
display window shows date and time.
2. To turn off the unit, press and hold the
POWER
button until unit beeps and
display window goes blank.
Turning On / Off the Unit
The system will turn off automatically if the unit remains idle for 60 seconds in
Standby mode to save battery power.
Note:
- 6 -
OPEN
