DNT MemoPen Data, Руководство пользователя

Страница: 27 / 52

- 27 -
English
Editing messages
Combine messages
Only messages which follow each other e.g. 05+06 can
be combined. If you want to combine messages which
do not follow each other, you must move one of the mes-
sages, so that they follow each other (ref.
move message ).
To combine two messages proceed as follow:
1. Start the playback (ref. playback ) of the message to be divided.
2. Press the PAUSE/DISP button, on the display
PAUSE
appears.
3. Press the MENU button (jog slide key) until (approx. 1 sec.) the display
shows
OFF DIV
. Press the MENU button 1 x for a short time again, the
display shows
OFF JOIN
.
4. Use the / button (jog slide key) to select
ON JOIN
. The number of
messages are fl ashing at the display.
5. Press the MENU button (jog slide key) for a short time to fi nally combine
the two messages.
6. The messages are combined when the display goes back to Stop-Mode.
All message numbers behind this message will decrease by 1.
If the recorded message is very long, it takes some time to
combine it.
The new message has the date and lock information of the
fi rst message.
Don’t remove the battery during combining the message. The
message will be destroyed and can’t be played again.
Messages that are recorded in different recording modes
can’t be combined.
If there is not enough memory capacity available, messages
can’t be combined.