DNT MemoPen Data, Руководство пользователя

Страница: 16 / 52

- 16 -
English
Specical functions
Microphone sensitivity
There are three possibilities for microphone sensitivity: low
LO
, normal
NOR
and high
HI
. If the low
LO
sensitivity is selected, you should speak directly into the recorder and
it records only the voice without any unwanted noise. To record a conversation during a
meeting you should select the high (HI) sensitivity, under all other condition normal will
be the best.
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Press the MENU -button (jog slide key) 3 x for a short time, on the display
appears
MIC
.
3. Use the / button (jog slide key) to change the sensitivity. On the
display
HI
for high microphone sensitivity
NOR
for normal microphone
sensitivity and
LO
for low microphone sensitivity appears.
The microphone sensitivity can also be changed during
recording.
Voice operating system (VOS)
The voice operating system is designed to save memory capacity. This means it records
only the voice. If there is a speech pause, the recorder stops automatically. After this
pause the recording starts again automatically.
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Press the MENU -button (jog slide key) 4 x for a short time, on the display
VOS
appears.
3. Use the / button (jog slide key) to select the VOS on or off. On the
display
ON
for VOS on or
OFF
for VOS off appears.
VOS can be switched on/off during recording.