manualshive.com logo in svg

DNP CX-330, Инструкция по эксплуатации, Страница: 30 / 32

Поделиться
Скачать
DNP CX-330 Скачать руководство пользователя страница 30

 

Troubleshooting 

(Cont’d)

 

(Cont’d) 

Error Code 

Displayed Message 

Actions 

0104F200 

Hardware failure of Retransfer Roller 
Thermistor happens.  Please turn 
off and on the printer power to 
initialize the printer. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104F300 

The temperature of Bend Remedial 
Roller is too hot.    Please turn off the 
printer power till it becomes cool 
enough. 

Turn off the power of the printer.    Turn on again after 
the temperature of the bend remedy roller has gone 
down. 

Call for servicing if this problem recurs. 

0104F400 

Hardware failure of Bend Remedial 
Roller happens.    Please turn off 
and on the printer power to initialize 
the printer. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104F500 

Bend Remedial Roller thermistor is 
out of order.    Please turn off and on 
the printer power to initialize the 
printer. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104F600 

The temperature in the printer is too 
cool.    Please turn off the printer 
power till it becomes warm enough. 

Turn off the power of the printer.    Turn on again after 
allowing the surrounding temperature of the printer to 
rise. 

Call for servicing if this problem recurs. 

0104F800 

The temperature of Thermal Head is 
too hot.      Please turn off the printer 
power till it becomes cool enough. 

Turn off the power of the printer.    Turn on again after 
the temperature of the thermal head has gone down.

Call for servicing if this problem recurs. 

0105FB00 

Download data to the printer is 
invalid.    Please confirm the file is 
correct. 

Check to ensure that the downloaded file is correct. 

0142A200 

End of Retransfer Film, please 
replace the film with a new. 

Replace the retransfer film.    After doing so, close 
the printer door, followed by pressing the RESET and 
ENTER buttons in sequence to initialize the printer. 

0142B200 

End of Ink Ribbon, please replace 
the ink with a new. 

Replace the ink ribbon.    After doing so, close the 
printer door, followed by pressing the RESET and 
ENTER buttons in sequence to initialize the printer. 

 

30 

Содержание CX-330

































Отзывы:

Нет отзывов