manualshive.com logo in svg

DNP CX-330, Инструкция по эксплуатации, Страница: 29 / 32

Поделиться
Скачать
DNP CX-330 Скачать руководство пользователя страница 29

 

Troubleshooting 

(Cont’d)

 

(Cont’d) 

Error Code 

Displayed Message 

Actions 

0104AC00 

Hardware failure happens in the MG 
encoder.    Please turn off and on the 
printer power to initialize the printer.

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104AF00 

Communication error happens 
between printer and MG encoder.   
Please turn off and on the printer 
power to initialize the printer. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104B900 

External IC unit is not set correctly.   
Please turn off the printer power and 
set External IC unit correctly. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104BA00 

Dip switch setting in the external IC 
unit is not correct.    Please turn off 
the printer power and correct Dip 
switch setting in External IC unit. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104BE00 

Communication error happens 
between printer and External IC unit.
Please turn off the printer power and 
connect communication cable 
correctly. 

Turn off the power of the printer.    Unplug the cable 
connecting the external IC unit to the printer, and 
plug in again. 

Call for servicing if this problem recurs. 

0104BF00 

Communication error happens 
between printer and laminator.   
Please turn off the printer power and 
connect communication cable 
correctly. 

Turn off the power of the printer.    Unplug the cable 
connecting the laminator to the printer, and plug in 
again. 

Call for servicing if this problem recurs. 

0104C000 

Hardware failure happens in the 
turnover unit.    Please turn off and 
on the printer power to initialize the 
printer. 

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104C100 

Hardware failure of Heater Cam 
happens. Please turn off and on the 
printer power to initialize the printer.

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

0104F000 

The temperature of Retransfer 
Roller is too hot.    Please turn off the 
printer power till it becomes cool 
enough. 

Turn off the power of the printer.    Turn on again after 
the temperature of the retransfer roller has gone 
down. 

Call for servicing if this problem recurs. 

0104F100 

Hardware failure of Retransfer Roller 
happens. Please turn off and on the 
printer power to initialize the printer.

Turn off the power of the printer and turn on again. 

Call for servicing if this problem recurs. 

 

29 

Содержание CX-330

































Отзывы:

Нет отзывов