44
ASSEMBLY DIAGRAM AND PARTS LIST
1
2
3
PHD-30
HOLDER (PIERCE HOLDER)
2
4
5
KJJ46271-003
TAP SCREW
7
6
7
8
9
SYMBOL
NO.
PART NO.
REVISED
PART NO.
Rev.
Price
(Yen)
PART NAME
QTY
DESCRIPTION
7
1
M
M
Exploded Mechanical Assembly (Turn Motor) Diagram
5
KJJ46271
-003 x5
3
Clamp
Insert connector
Slide from underneath the
card edge holder
[Before Installation]
• Check the wiring (See Figure 1)
• Adjust the wire position of the turn unit (See Figure 2)
• Check the cam position (See Figure 3)
[During Installation]
• Ensure that the wire is not trapped in the shaft
• Ensure that the wire is not caught
Lead the wire and check the clamping position
Upon assembling, adjust the
cam position to align
with the arrow.
Clamp the wire
that is guided
through the bush
3
R
Be careful not
to catch the wire
Check operation of the head press
assembly upon installing the
turn motor assembly
Upon installing the turn motor assembly,
check by turning the jog dial to
ensure that the turn unit rotates.
Check operation of the roller
(Roller can be lifted using a hand and
returns to the original position once released)
Before installing the turn motor unit,
turn the turn unit and ensure that
the wire is located on the left as
shown in the diagram.
Figure 2
Figure 1
Figure 3
All manuals and user guides at all-guides.com
