DNA DNA-1350 Скачать руководство пользователя страница 9

 

The ground the switch is located next to the DI output XLR.  It allows you to reconfigure 
the ground reference for pin one of the XLR.  In the normal condition pin one of the 
output jack is connected directly to the main chassis ground.  When the ground is lifted 
by engaging the ground lift switch, a small resistor is placed in series with the ground 
connection.  This is useful for eliminating or reducing ground loops and unwanted hum 
and noise in the systems. 
 

Auxiliary Input jacks 

The AUX IN as an RCA input Jack set that features actively summed left and right 
inputs.  It has six dB of voltage gain.  It provides a high-quality input that can take an 
IPad, auxiliary device or drum machine and amplify it to the proper level to mix with the 
live bass guitar signal. 

Foot switch control jack A 

Switch connection Jack (A). Switch one and two control the tone equalizer bypass and 
the shape bypass functions. These features are only available on the foot switch.  

EQ.  Bypass

   FT/SW (A)   Switch (1).  

Shape Bypass

  FT/SW (A).  Switch (2).  

Foot switch control jack B 

Switch connection Jack (B) switch one and two allow you to control both the effects 
on/off, and the compressor bypass function from this foot switch.

 

Both the FX on off in 

the compressor bypass are available both from the front panel and the foot switch

 

FX On/Off      

FT/SW (B)  Switch (1) 

  

Comp Bypass    

FT/SW (B)  Switch (2) 

 

Slave Output Connection 

The slave output connection is used to link other amplifiers to your amplifier, making 
your amplifier final volume control the master control for the system.

 

Slave Input Connection 

This input jack allows you to connect your 

unit’s amplifier as a powered slave to another 

preamplifier. This connection bypasses the main input jack, preamp and all controls on 
your unit.

 

Side Chain Loop 

The side chain effects loop is a useful feature that allows you to connect a special effect 
in parallel with your normal tone controls. This lets you blend the effects signal with the 
normal signal. You thereby maintain the best possible signal-to-noise ratio and overall 
sound quality possible while using a special effect. 

 

Effects Loop 

Содержание DNA-1350













Отзывы: