
11
temperatures and unusually high current demands that exceed the systems normal
parameters can potentially cause the system to go into protect mode.
Output Peak Indicator
The output limit indicator is the yellow LED. It will flash briefly anytime the amplifier
output distortion exceeds 0.01%. This normally occurs as the amplifier nears full power.
This light flashing is an indication that you are getting close to the full power limits of the
amplifier
.
It is not
a
clipping
indicator.
It is okay for the light to be flashing periodically,
but it should not be on continuously.
3 Year Warranty Terms
DNA LIMITED WARRANTY
DNA LLC warrants the product you have purchased to be free of defects in materials
and workmanship in normal use for a period of (3) years from the date of original
purchase. This warranty shall be to the original purchaser when purchased from an
Authorized DNA Dealer. The manufacturer warrants the speakers for period of (3)
years. Defective parts found during the warranty period will be replaced or repaired
without charge with a proof of purchase if the complete product is returned to DNA LLC
or any Authorized DNA Service Center within the U.S.A.
DNA LLC reserves the right to use materials readily available at the time of the repair.
All Warranty service requires a Proof of Purchase (sales receipt) to be presented at time
of service request. Any repair or service performed by any person or entity other than
the DNA factory, or an Authorized DNA Service Center is not covered by this limited
warranty. The customer is responsible to pay transportation to and from The DNA LLC
Authorized Service Center, if the required service cannot be performed at the
Authorized DNA Service Center the unit must be returned the DNA factory for that
service.
What is covered against manufacturing defects
Parts and Labor to correct any defect in original materials and or workmanship.
WHAT IS NOT COVERED
Products whose serial numbers have been altered or removed or have had their RFID
chips removed. Normal wear and tear from use is not covered. Damage to the units
finish due to misuse. Operations that are outside of the specified ratings, neglect or
accident.
Shipping Damage is not covered under the warranty. Report damage upon receipt of
item to the carrier (i.e. UPS). The freight carrier must be notified upon receipt of items to
insure a freight damage claim resolution. Shipping damage not filed with carriers within
(48) hrs upon receipt will not be covered under warranty. Report any shipping damage