3
BASIC OPERATING INSTRUCTIONS
Your 1350 Amplifier has a smart switching supply that will automatically adjust to the
local operating voltage from 90 VAC to 250VAC and frequencies from 50-60 Hz. You
will need to have the correct type and style of AC power input cable connection for the
country you are playing in.
Connect your DNA Series bass guitar amplifier and appropriate speaker of a similar
power rating, using the NL-4 connectors on the rear of the amplifier chassis. The NL-4
connectors on both your amplifier and your DNA speaker cabinet are wired together in
parallel (see below)
Connect your amplifier using one connector and use the other one
to connect another speaker cabinet if desired. Make certain that the total impedance of
all speaker cabinets you are using is no lower than the minimum rated impedance (4
Ω)
of your amplifier.
Always make all speaker connections before turning your
amplifier on.
.
Connection Notes!
NEVER
connect two different amplifiers together, or two channels of the same amplifier,
into one cabinet. This will be very likely to seriously damage your amplifier and possibly
the speaker cabinet as well.