![background image](http://html1.mh-extra.com/html/dmx4all/dmx-relais-analog-interface-1/dmx-relais-analog-interface-1_user-manual_2514398010.webp)
DMX Relais/Analog Interface 1
10
DMX-FAIL Funktion
The
DMX Relais / Analog Interface 1
has a DMX-FAIL Function which stores the
last value in the case of a DMX signal loss (HOLD) or left the relay unchanged with a
predefined value in its conditions.
The DMX-HOLD function can be activated via RDM or by switch 10 during the
operation mode settings.
Switch 8 ON
DMX-HOLD active
Switch 8 OFF
DMX-HOLD not active
If HOLD is switched on, the last received DMX values are remained in
case of a DMX signal failure.
If HOLD is switched off,
the DMX values are replaced with a value set by RDM in
case of a DMX signal failure. In the delivery state this value is 0, so that the relays
switch off.
In case of a power failure the DMX values held with HOLD are discarded!
A value set by RDM is deleted when HOLD is selected. After switching off the
HOLD function, the default value 0 is used.