![background image](http://html1.mh-extra.com/html/dmx4all/dmx-relais-analog-interface-1/dmx-relais-analog-interface-1_user-manual_2514398017.webp)
DMX Relais/Analog Interface
Risk-Notes
You purchased a technical product. Conformable to the best
available technology the following risks
Failure risk:
The device can drop out partially or completely at any time without warning. To
reduce the probability of a failure a redundant system structure is necessary.
Initiation risk:
For the installation of the board, the
foreign components according to the device paperwork. This work can only be
done by qualified personnel, which read the full device paperwork and understand
it.
Operating risk:
The Change or the operation under spe
systems/components could as well as hidden defects cause to breakdown within
the running time.
Misusage risk:
Any nonstandard use could cause incalculable risks and is not allowed.
Warning:
It is not allowed to use the de
persons depend on this device.
DMX Relais/Analog Interface 1
You purchased a technical product. Conformable to the best
available technology the following risks should not excluded:
The device can drop out partially or completely at any time without warning. To
e probability of a failure a redundant system structure is necessary.
For the installation of the board, the board must be connected and adjusted to
foreign components according to the device paperwork. This work can only be
fied personnel, which read the full device paperwork and understand
The Change or the operation under special conditions of the installed
systems/components could as well as hidden defects cause to breakdown within
Any nonstandard use could cause incalculable risks and is not allowed.
It is not allowed to use the device in an operation, where the safety of
persons depend on this device.
17
You purchased a technical product. Conformable to the best
should not excluded:
The device can drop out partially or completely at any time without warning. To
e probability of a failure a redundant system structure is necessary.
board must be connected and adjusted to
foreign components according to the device paperwork. This work can only be
fied personnel, which read the full device paperwork and understand
cial conditions of the installed
systems/components could as well as hidden defects cause to breakdown within
Any nonstandard use could cause incalculable risks and is not allowed.
vice in an operation, where the safety of