![background image](http://html1.mh-extra.com/html/dmx4all/dmx-relais-analog-interface-1/dmx-relais-analog-interface-1_user-manual_2514398011.webp)
DMX Relais/Analog Interface 1
11
RDM
(from hardware V1.2)
RDM is the short form for
R
emote
D
evice
M
anagement.
As soon as the device is within the system, device-dependent settings occur
remotely via RDM command due to the uniquely assigned UID. A direct access to the
device is not necessary.
If the DMX start address is set via RDM, all address switches at the DMX
Relais/Analog Interface 1 must be set to OFF ! A DMX start address set by the
address switches is always prior !
This device supports the following RDM commands:
Parameter ID
Discovery
Command
SET
Command
GET
Command
ANSI/
PID
DISC_UNIQUE_BRANCH
E1.20
DISC_MUTE
E1.20
DISC_UN_MUTE
E1.20
DEVICE_INFO
E1.20
SUPPORTED_PARAMETERS
E1.20
PARAMETER_DESCRIPTION
E1.20
SOFTWARE_VERSION_LABEL
E1.20
DMX_START_ADDRESS
E1.20
DEVICE_LABEL
E1.20
MANUFACTURER_LABEL
E1.20
DEVICE_MODEL_DESCRIPTION
E1.20
IDENTIFY_DEVICE
E1.20
FACTORY_DEFAULTS
E1.20
DMX_PERSONALITY
E1.20
DMX_PERSONALITY_DESCRIPTION
E1.20
DMX_FAIL_MODE
E1.37
SERIAL_NUMBER
1)
PID:
0xD400
1) Manufacturer depending RDM control commands (MSC - Manufacturer Specific Type)