AuroraDMX Control
20
CE-Conformity
This assembly is controlled by a microprocessor and uses high
frequency. In order to maintain the properties of the module with
regard to CE conformity, installation into a closed metal housing
in accordance with the EMC directive 2014/30/EU is necessary.
Risk-Notes
You purchased a technical product. Conformable to the best available
technology the following risks should not excluded:
Failure risk:
The device can drop out partially or completely at any time without warning. To
reduce the probability of a failure a redundant system structure is necessary.
Initiation risk:
For the installation of the board, the board must be connected and adjusted to
foreign components according to the device paperwork. This work can only be
done by qualified personnel, which read the full device paperwork and
understand it.
Operating risk:
The Change or the operation under special conditions of the installed
systems/components could as well as hidden defects cause to breakdown
within the running time.
Misusage risk:
Any nonstandard use could cause incalculable risks and is not allowed.
Warning:
It is not allowed to use the device in an operation, where the safety
of persons depend on this device.
Disposal
Electronical and electronic products must not be disposed in domestic
waste. Dispose the product at the end of its service life in accordance
with applicable legal regulations. Information on this can be obtained
from your local waste disposal company.
