AuroraDMX Control
17
Firmware Update
The
AuroraDMX Control
has an Update-Function which allows transferring future
Firmware-Versions.
Please proceed as follows:
-
Turn off the AuroraDMX Control (Cut the power supply and USB !)
-
Set switch 7-10 as shown:
-
Turn on the device
-
Generate USB-Connection to PC
-
Start update-Software
DMX4ALL USB-Updater
-
Select AuroraDMX Control from list
-
Click
Firmware-Update
-
Select Firmware-File (.bin) and confirm
-
Wait until the update has finished
No program is allowed to access the USB-Connection.
Close the DMX-Configurator and USB-Updater before USB-Cable is
connected to the AuroraDMX Control. Do not start the USB-Updater if the DMX
AuroraDMX Control is in its update-mode.
If an error occurs during the update, you can start from beginning every time.
