![background image](http://html1.mh-extra.com/html/dmx4all/artnet-relais-analog-interface-4/artnet-relais-analog-interface-4_user-manual_2514396010.webp)
ArtNet Relais/Analog Interface 4
10
For a better distinction any name can be used for the ArtNet-Node.
The
Short-name
is limited to 18 signs and the
Long-name
is limited to 64 signs.
Under the ArtNet-Settings you can carry out the settings for the
Subnet
,
Net
and
Port/Universe
.
The
DMX-Start Address
shows the Channels
within the according DMX-Universe
from whence the outputs should be appealed.
Thereby the DMX-Starting address complies to relay 1 and the following addresses
comply to relay 2-4 followed by the analog outputs 1-4.
If a DMX-Starting address is adjusted via the switches this address is regarding prior.
Note, that the channel assignment can differ with placed MODE-Jumper !
Within the output settings for each relay and for each analog output individual
names
can be entered.
Furthermore, after turning on (
Power on value
) the conditions for the relays can be
defined. Turning on the relays can occur delayed.
The
Factory Settings
will be restored by entering the number 7319.
SAVE
stored the configurations respectively restored the Factory Settings.