![background image](http://html1.mh-extra.com/html/dmx4all/artnet-relais-analog-interface-4/artnet-relais-analog-interface-4_user-manual_2514396007.webp)
ArtNet Relais/Analog Interface 4
7
LED Display Codes
The integrated LED is a Multi-functional-display.
In the normal DMX-mode the LED flashes non-stop. In this case the device is
working. If the LED is permanently dark, there is no DMX512-signal at the entry.
Also the LED signalled the operation status. In this case the LED lights up in short
pitches and then turns into off modus. The Number of flashing signals is equal to the
number of the error status.
Error
Status
Error
Description
1
No DMX
There is no DMX-signal at the entry
2
Address error
Please check the adjusted starting address
DMX-Addressing
The DMX-starting address is adjustable via switch 1to 9.
Thereby switch 1 has the valency 2
0
(=1), switch 2 the valency 2
1
(=2) and so on until
switch 9 has the valency 2
8
(=256).
The sum of the values of the switches showing ON correspond to the starting
address.
Address Switch
Address Switch
1
...
...
2
508
3
509
4
510
5
511
If switches 1-9 are OFF, the DMX start address set via the web interface is
used!