ArtNet Relais/Analog Interface 4
14
DMX4ALL-Command support
The
ArtNet Relais/Analog Interface
has another communication interface which
receives data via TCP-packages at Port 10001.
TCP-Control
For controlling the interface directly via TCP-connection please use the set web
browser IP-address and use Port 10001. The sent and received data are RAW-data
packages.
Please take the potential DMX4All-Commands from the separated DMX4ALL-
Command description.
VCP-Control
For controlling via a COM-Port a TCP-VCP-program must be installed, providing a
virtual Com Port (VCP).
We recommend the tool
Serial to Ethernet Connection
tested by us. This tool is
available as download within the support area.
It is needed to enter a password
during the installation (see adjacent
figure).
After the installation start the tool
„Centos SEC“ being on the desktop.
Add a VCP with
Add
and specify the
parameters for this VCP-Port as per
margin.
Please mind to use the IP which is
entered via the web browser.
