ArtNet-DMX TWIN PoE
10
DMX-Input
To receive DMX via a port, the according ArtNet-DMX TWIN PoEs Port must be
configured as DMX-Input. Select in the Global-Settings the setting
DMX-Input.
Click
Port 1
or
Port 2
to get the following Configuration-Site:
Use Broadcast
: The DMX-Data are sent to all ArtNet devices
Use Unicast
:
The DMX-Data are sent to one certain device with the
Unicast IP
within the ArtNet.
For the DMX-Input several actions can be selected in the case of a DMX-Signals
failure (
DMX-IN FAIL
).
NO DATA
- No DMX-Input is received via ArtNet
HOLD last DMX data
- The latest data are maintained
CLEAR all DMX channels to 0% - All DMX-Channels are set to 0
SET all DMX channels to 100%
- All DMX-Channels are set to 255
The
Update-Rate,
outputting the DMX-Input data, can be adjusted in several times.
On change data
transferred the DMX-Input data only if these change, max all 0,1
seconds.
DMX Framerate
transferred the received DMX-Values as soon as a frame ends. So
the frame rate of the incoming DMX-Signals is used for the Update-Rate.
By deactivating the function
Enable 4 second refresh
no Refresh-Data package is
sent.
Содержание ArtNet-DMX TWIN PoE
Страница 1: ...ArtNet DMX TWIN PoE User manual...
