DMT LS-190 Скачать руководство пользователя страница 24

Страница: 24 / 76

Ordercode: 101600

LS-190 LED Screen Processor

8. System

01)

While in main menu, turn the menu control (02) and choose SYSTEM.

02)

Press the menu control (02) to enter.

03)

Turn the menu control (02) to choose, and then press it to enter one of the following 6 options:

8.1. System Info

System information. The pieces of information are:

•

MCU VER: Current MCU version.

•

VIDEO VER: Current video version.

•

SN: Serial number of the LS-190.

•

IP: The device’s IP address.

8.2. Date & Time

Show and change the date or time. The available menus are:

•

DATE: View the current date.

•

TIME: View the current time.

•

WORK TIME: Show the working time from last boot to present.

•

TOTAL TIME: Total working time.

•

BOOT TIMES: The overall number of boots performed since the device was built.

•

TIMING CONTROL: Timing control switch. Choose ON/OFF.

•

CHANGE DATE: Turn the menu control (02) to adjust and press the menu control (02) to set the

desired year, month and day.

•

CHANGE TIME: Turn the menu control (02) to adjust and press the menu control (02) to set the desired

hour, minutes and seconds.

8.3. Ethernet

Set the network settings. The available menus are:

•

NETWORK: Choose ON/OFF.

•

IP ADDRESS: Turn the menu control (02) to adjust and press the menu control (02) to set the desired

digits which create the IP address.

•

SUBNET MASK: Turn the menu control (02) to adjust and press the menu control (02) to set the subnet

mask.

•

GATEWAY: Turn the menu control (02) to adjust and press the menu control (02) to set the gateway.

8.4. Lock Front Panel

Set whether you want to lock the buttons.

01)

Press the menu control (02) to lock the buttons or press the MENU/EFFECT button to return to the

previous menu.

02)

When the keys are locked, the display will show: "BUTTONS ARE LOCKED! PRESS MENU KEY AND HOLD

3s TO RELEASE!"

03)

Press and hold down the MENU/EFFECT button for 3 seconds to unlock the buttons.

8.5. License Setup

01)

The device will not work if you exceed the total operation time.

8.6. Can Use Time

01)

The menu displays the remaining operation time after which the device will cease to function.

9. Factory Reset

01)

While in main menu, turn the menu control (02) and choose FACTORY RESET.

02)

Press the menu control (02) to enter.

03)

Turn the menu control (02) to choose, and then press it to enter either FACTORY RESET (complete

reset) or SAVE IP RESET (the IP address will not be reset).

04)

Press the menu control (02) to confirm the desired reset option or press the MENU/EFFECT button to

return to the previous menu.

Содержание LS-190













































































Результаты поиска

Содержание LS-190

Отзывы:

Бренды по названию

Популярные бренды

DMT LS-190, Руководство пользователя

Результаты поиска

Содержание LS-190

Отзывы:

Бренды по названию

Популярные бренды