DMT LS-190 Скачать руководство пользователя

Страница: 21 / 76

Ordercode: 101600

LS-190 LED Screen Processor

PUSH BOTTOM:

Note:

Emerging image

Disappearing image

Arrows represent the direction of the image movement. The image is compressed or stretched to the

direction indicated by the arrow, until it disappears or is displayed in full screen mode.

3.4. Fade Time

Set the fade time settings. The adjustment range is between 0-1.0s. The LS-190 uses a seamless fade, while

switching between sources.

3.5. Alpha

Image transparency. The adjustment range is between 0-16.

4. Audio

01)

While in main menu, turn the menu control (02) and choose AUDIO.

02)

Press the menu control (02) to enter.

03)

Turn the menu control (02) to choose, and then press it to enter one of the following 4 options:

•

Mute: Mute function. Choose ON/OFF.

•

Volume: Volume adjustment.

•

Audio In: Choose audio input source (IMAGE A/IMAGE B)

•

HDMI: Choose internal or external audio for HMDI.

5. Split

01)

While in main menu, turn the menu control (02) and choose SPLIT.

02)

Press the menu control (02) to enter.

03)

Turn the menu control (02) to choose, and then press it to enter one of the following 8 options:

•

Split: Split function. Choose ON/OFF.

•

H TOTAL: The total width points of LED display, that will split.

•

V TOTAL: The total height points of LED display, that will split.

•

H POS: The horizontal position of the device.

•

V POS: The vertical position of the device.

•

H SIZE: The width of the device.

•

V SIZE: The height of the device.

•

RESET: Reset to default settings.

Содержание LS-190













































































Результаты поиска

Содержание LS-190

Отзывы:

Похожие инструкции для LS-190

Бренды по названию

Популярные бренды

DMT LS-190, Руководство пользователя

Результаты поиска

Содержание LS-190

Отзывы:

Похожие инструкции для LS-190

Бренды по названию

Популярные бренды