DMT LS-190, Руководство пользователя

Страница: 19 / 76

18
Ordercode: 101600
LS-190 LED Screen Processor
•
Mode 2: Graphic content is controlled by double-image transparency, the background is
completely transparent.
• BLEND LEVEL: Set the image display transparency. The adjustment range is between 0-16.
•
ABOVE/BELOW:
•
ABOVE: In image 2, if the pixel value is higher than the setting value, then the image is the graphic
content pixel. Otherwise, it is the graphic background pixel. It should be combined with "AND/OR"
options.
• BELOW: In image 2, if the pixel value is lower than the setting value, then the image is the graphic
content pixel. Otherwise, it is the graphic background pixel. It should be combined with "AND/OR"
options.
• AND/OR
•
RED: Red limit. Define the minimum and maximum value of the red channel. The adjustment range is
between 0-248.
•
GREEN: Green limit. Define the minimum and maximum value of the green channel. The adjustment
range is between 0-248.
• BLUE: Blue limit. Define the minimum and maximum value of the blue channel. The adjustment range
is between is 0-248.
For more details, please see How to Perform the Text Overlay Setting, page 50.
2.10. Display Mode
•
MODE: Image mode selection. Select the desired mode. The available options are: black, video
image, freeze image, flat color and test pattern. In order to access this menu, you can press the
FREEZE button.
•
TEST PATTERN: Select one of the 66 test patterns. The function is only available if there is an input
source.
•
FLAT COLOR: Set an output color which will fill the whole screen.
2.11. Gamma
Adjust the image gamma value. The available values are: -1.2, -1.4, -1.6, 1, 1.2, 1.4, 1.6, sRGB.
3. Transition
01) While in main menu, turn the menu control (02) and choose TRANSITION.
02) Press the menu control (02) to enter.
03) Turn the menu control (02) to choose, and then press it to enter one of the following 5 options:
3.1. Deinterlace
Forced Deinterlace function. Choose ON/OFF.
•
ON: Forced interlace for interlaced signal without effect switching, but with effects switching for
progressive signal.
•
OFF: No deinterlace, with effect switching.
3.2. Image Enhance
Image enhancement. Choose ON/OFF.