manualshive.com logo in svg

DMP Electronics XR150FC Series, Руководство по установке

Поделиться
Скачать
DMP Electronics XR150FC Series Скачать руководство пользователя страница 8

Digital Monitoring Products 

XR150FC/XR550FC Series Installation Guide

4

IntroductIon

3.4 

Accessory Devices

Interface Adaptor and Interface Cards

 263C CDMA Cellular Communicator Allows you to connect the XR150FC/XR550FC Series to any compatible CDMA/SMS network.
 263H HSPA+ Cellular 

Communicator

Allows you to connect the XR150FC/XR550FC Series to any compatible HSPA/SMS network.

Expansion Modules

 270 Network Transient

 

 Suppression Module

Provides transient surge protection for the J1 Ethernet Connector.

 277 Trouble Sounder

Provides local sounder for monitoring of panel operations and loss of Keypad Bus.

710 Bus Splitter/Repeater

Increase keypad/LX-Bus™ wiring distance to 2500 feet.

711 Single Point Zone Expanders

Provides one Class B zone for connecting burglary devices.

714, 714-8, 714-16 Zone Expanders Provides Class B zones for connecting burglary and non-powered fire devices.
712-8 Zone Expander

Provides Class B zones for connecting burglary devices.

715, 715-8, 715-16 Zone Expanders Provides 12 Vdc Class B powered zones for connecting smoke detectors, glassbreak 

detectors, and other 2- or 4-wire devices.

716 Output Expander

Provides four Form C relays (SPDT) and four switched grounds (open collector) for use in a 

variety of remote annunciation and control applications for use on the LX-Bus only.

717 Graphic Annunciator Module

Provides 20 zone following annunciator outputs (open collector) for use in a variety of 

remote annunciation and control applications for use on the LX-Bus only.

734, 734N Wiegand Interface 

Modules

Provides system codeless entry, and arming and disarming using access control readers.

DMP Two-Way Wireless Devices

1100X/1100XH Wireless Receiver

Supports up to 500 devices in residential or commercial wireless operation.

 1100R Repeater

Provides additional range for wireless devices.

1101 Universal Transmitter

Provides both internal and external contacts that may be used at the same time to yield 

two individual reporting zones from one wireless transmitter.

1102 Universal Transmitter

Provides an external contact.

1103 Universal Transmitter

Provides both and internal and external contacts that may be used at the same time to 

yield two individual reporting zones from one wireless transmitter. Requires EOL resistor 

for external contact. Provides Disarm/Disable functionality.

1105 Universal Transmitter

Provides both internal and external contacts that may be used at the same time to yield 

two individual reporting zones from one wireless transmitter.

1125 PIR Motion Detector

Provides multiple lens configurations, dual coverage area selection, and sensitivity 

adjustments.

1127C/1127W PIR Motion Detector Wall mount motion detector with panel programmable sensitivity and Disarm/Disable 

functionality.

1142BC Two-button Hold-up Belt 

Clip Transmitter 

Provides two-button hold-up operation with a belt clip.

1142 Two-button Hold-up 

Transmitter

Provides permanently mounted under-the-counter two-button hold-up operation.

1161 Residential Smoke Detector

Residential smoke detector with sounder.

1162 Residential Smoke/Heat 

Detector

Residential smoke/heat detector with sounder and fixed rate-of-rise heat detector.

Содержание XR150FC Series

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды