manualshive.com logo in svg

DMP Electronics XR150FC Series, Руководство по установке

Поделиться
Скачать
DMP Electronics XR150FC Series Скачать руководство пользователя страница 20

Digital Monitoring Products 

XR150FC/XR550FC Series Installation Guide

16

InstallatIon

Wireless Bus Expansion

14.1 Description

The J13 Wireless Bus (XBUS) header provides connection for the 1100X or 1100XH Wireless Receiver. The XBUS 

provides up to 500 wireless zones numbered 500-999. Refer to the 1100X Wireless Receiver Install Guide (LT-0708) or 

the 1100XH Wireless Receiver Install Guide (LT-0970) for complete information.

• XR550 provides up to 500 zones
• XR150 provides up to 100 zones

14.2  Wireless Bus LEDs

The two LEDs, located above the XBus header, indicate data transmission and receipt. The left LED flashes green to 

indicate the panel is transmitting data. The right LED flashes yellow to indicate the panel is receiving data.

LX-Bus Expansion

15.1  LX-Bus Headers

There are five LX-Bus headers near the bottom of the panel:

• LX500 (J14), provides zones 500-599 (XR150FC/XR550FC)
• LX600 (J9), provides zones 600-699 (XR550FC only)
• LX700 (J15 ), provides zones 700-799 (XR550FC only)
• LX800 (J17 ), provides zones 800-899 (XR550FC only)
• LX900 (J19 ), provides zones 900-999 (XR550FC only)

15.2  LX-Bus LEDs

The two LEDs, located above each LX-Bus header, indicate data transmission and receipt. The left LED flashes green 

to indicate the panel is transmitting LX-Bus data. The right LED flashes yellow to indicate the panel is receiving LX-

Bus data.

15.3  OVC LEDs

The Overcurrent LEDs (OVC) light Red when the devices connected to the Keypad Bus and LX-Bus(es) draw more 

current than the panel is rated for. The first OVC is located to the left of the 893A Connector and the second is to 

the right of the J24 Cell Module. Each LED turns a steady Red when lit. When the OVC LED lights Red, the LX-Bus(es) 

and Keypad bus are shut down.

J1 Ethernet Connector

16.1 Description

The J1 Ethernet Connector is available on the XR150DNFC/XR550DNFC with Network to connect directly to an 

Ethernet network using a standard patch cable. The Ethernet Connector supports 100MB/s full duplex operation and 

the maximum impedance is 100 Ohms.

16.2  Ethernet LEDs

The two LEDs, located on the top edge of the J1 Ethernet Connector, indicate 

network connection. The right, Link LED lights up green to indicate a valid 

receive connection from the host network. The yellow LED lights when connected 

to a 100Mb network and is off when connected to a 10Mb network.

16.3  Network Transient Suppression

For listed fire applications, use a Model 270 Network Transient Suppression Module to provide transient surge 

protection for the Ethernet (J1) Connector.

Figure 7: LX-Bus Headers and LEDs

Figure 8: J1 Header and LEDs

J1

Ethernet

Link LED

Activity LED

Содержание XR150FC Series

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды