Door Strike Relay Operation
As soon as the user code sent from the reader has been verified by the panel, the keypad Door Strike relay activates for five seconds.
(Note: The length of the five second delay is programmable when the keypad is used on an XR200-485 system.) During this time, the
access door (connected to zone #2) must be opened to start the 30 second entry/exit timer and zone soft shunt. See the timeline shown
below.
The relay activates for
five seconds during
which time you can open
the door.
Once you open the door,
you have 40 seconds to
exit and close the door
before the zone 2 Soft-
Shunt expires.
Select NO to arm or disarm
individual areas. Select YES, or
simply wait, and the keypad will
automatically arm or disarm all
areas for which you are authorized.
The system disarms the
areas and activates the Door
Strike relay. Area systems
may allow a delay for you to
select only certain areas.
See Arming and Disarming.
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
Digital Monitoring Products
ABC SECURITY
ARM DISARM
ABC SECURITY
ENTER CODE: –
ABC SECURITY
ALL? NO YES
POWER
POWER
POWER
ABC SECURITY
FRI 2: 5 1 A M
POWER
While the keypad is in
the Status List, present
your access card.
PERIM ALL
DISARM?
or
POWER
1 ----------- 5
5 Second
Strike
Access door
is opened.
30 Second "Soft-Shunt"
and entry/exit timer.
30
Seconds
At 20 seconds, the
keypad begins
beeping if door
has not closed.
If access door is still
open past 30 seconds, a
zone fault is indicated.
End of
timer.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when the MENU? NO YES display is shown.
ENTRY DELAY
All Systems - Once the protected door is opened and the
entry delay starts, the keypad displays ENTER CODE: -.
Present your card to the reader and, once it is validated, the
system disarms all areas accessible by you and activates the
Door Strike relay. Area systems provide a delay to allow
selected areas only to be disarmed. See Arming and Disarming
above.
The system arms or disarms
the areas and activates the
Door Strike relay.
There are three different operating modes: Door Strike, Arming
and Disarming, and Entry Delay. All of the examples below
assume that CLOSING CODE is YES in the panel's programming.
DOOR STRIKE
Area and All/Perimeter Door Strike - From the Status List,
present your card to the reader. Once it is validated by the
system, the Door Strike relay activates. See Door Strike Relay
Operation above. Home/Away systems only activate the Door
Strike relay when arming and disarming.
ARMING AND DISARMING
Area system Arming and Disarming - Press Command. The keypad displays ARM DISARM. Press the Select key under either
option. The keypad displays ENTER CODE: -. Present your card to the reader. Once it is validated by the system, all areas accessible
by you arm or disarm automatically and the Door Strike relay activates.
All/Perimeter system Arming and Disarming - Press
Command. The keypad displays PERIM ALL (when arming)
or DISARM?. Press the Select key under the desired option.
The keypad displays ENTER CODE: -. Present your card to
the reader. Once it is validated by the system, both areas arm
or disarm automatically and the Door Strike relay activates.
Home/Away system Arming and Disarming - Present your card to the reader. If the system is armed, once the card is validated
all areas are disarmed.
If the system is disarmed when you present your card, once it is validated all areas are armed in the AWAY mode.
POWER
ABC SECURITY
ENTER CODE: -
Access door is
opened.
POWER
User's Guide
