Digital Monitoring Products, Inc. | 9800 Series Installation and Programming Guide
9
Install the 9862USB Keypad
9862USB Wireless Graphic Touchscreen Keypads are intended for tabletop use. Follow
these steps to attach the desk stand legs and power the 9862USB keypad. See Figures 7,
8, and 9.
1.
Insert one leg into the holes on the back of the keypad.
2. Slide the leg upwards until the leg firmly snaps into place. Repeat the process to
attach the second leg. See Figure 7.
3. Fit the transformer strap onto the transformer, ensuring the strap slit is facing up
and the adapter plugs are fed through the strap plug openings. See Figure 8.
4. Feed the micro USB end of the power supply cable through the two slits in the
transformer strap, then plug the USB end into the USB port on the adapter.
5. Remove the center screw from the power outlet plate.
6. Plug the power supply into the outlet.
7. Place the outlet screw through the hole in the plastic strap and secure it into the
outlet.
8. Plug the micro USB end of the cable into the back of the keypad. See Figure 9.
