DMP Electronics 736P Radionics, Инструкция по установке и программированию

Страница: 7 / 40

Digital Monitoring Products, Inc. | 736P Installation and Programming Guide 3
INSTALL THE 736P
Mount the Module
The 736P comes in a high‑impact plastic housing that you can mount directly to a
wall, backboard, or other flat surface. For easy installation, the back of the housing
contains multiple holes that allow you to mount the module on a single‑gang switch
box or ring. The module can also be mounted in a DMP enclosure using the standard
3‑hole mounting pattern. Refer to Figure 2 and
Figure 3 as needed during installation.
1. Hold the plastic standoffs against the inside of the enclosure side wall.
2. Insert the included Phillips head screws from the outside of the enclosure into
the standoffs. Tighten the screws.
3. Carefully snap the module onto the standoffs.
1