DMP Electronics 736P Radionics, Инструкция по установке и программированию

Страница: 31 / 40

Digital Monitoring Products, Inc. | 736P Installation and Programming Guide 27
Radionics Terminology
The Radionics ZONEX ( ZON e EX pansion system) is the zone expansion bus, much like
DMP’s LX‑Bus. A POPEX ( P oint O f P rotection EX pander) is the device that provides the
ZONEX, similar to a DMP 481 Zone Expansion Interface Card that provides an LX‑Bus.
The POPIT (
P
oint
O
f
P
rotection
I
nput
T
ransponder) is a device on the ZONEX that
provides a protection device connection point, similar to a DMP 711 Single Point Zone
Expander Module. The OctoPOPIT is a ZONEX device that provides several connection
points, similar to a DMP 714‑8 Zone Expander combined with a 481 Interface Card. A
POPEX is not required when using an OctoPOPIT.
Compatible Radionics Devices
The 736P Module supports the following Radionics POPEX and OctoPOPIT devices:
• D8125 POPEX Zone Expander
• D8128A OctoPOPIT for 63‑point bus
• D8128C OctoPOPIT for 63‑point or 119‑point bus
• Compliance Listing Specifications
To comply with ANSI/UL 365 Police‑Connected Burglary Systems or ANSI/UL 609 Local
Burglary Alarm Systems, the 736P Module must be mounted in a listed enclosure with a
tamper installed.
For listed fire applications, the wiring connection must be 18 gauge or greater, unless the
wire complies with the requirements of the NEC 1999, and the wiring consists of two or
more insulated conductors under a non‑metallic jacket.