▯
Intended Use
The torch is designed for use both indoors and outdoors. The
torch is intended purely for private use and not for commercial
purposes or other usage.
The torch is not suitable for lighting rooms within a household.
▯
Observe the Safety Information
Read and observe all the safety information to protect yourself
and the environment from any harm. Refer to the information
sheet enclosed for the relevant information on safety.
WARNING! RISK OF FATAL INJURY THROUGH
ELECTRIC SHOCK!
NEVER use the power adapter if you suspect or see
damage to it.
▸
Do not put the device into operation if it is damaged.
▸
Never open or repair the power adapter yourself.
▸
Never touch the bare contacts with metallic objects.
▸
Never plug in or handle the power adapter with wet hands.
IMPORTANT! RISK OF PROPERTY DAMAGE THROUGH
ENVIRONMENTAL INFLUENCES!
Unfavourable environmental influences could cause damage to
the power adapter or impair its function.
▸
Prevent exposing the device to environmental influences such as
smoke, dust, vibration, chemicals, moisture, heat or direct sunlight.
▸
The power adapter is not waterproof so keep it dry.
▯
General View
The illustration depicts the torch in detail.
1
Torch attachment
6
Sealing ring
1
Working light
attachment
2
Sealing ring
7
Li-ion battery
1
USB cable
3
Locking ring
8
End cap
1
Power adapter
4
Press switch
9
Magnet
1
USB port
5
Housing
1
Gooseneck
attachment
▯
Checking the Package Contents
Check the package contents carefully before putting the device
into operation. If anything is missing or damaged, please contact
our Service partners.
▸
1 × LED torch with torch attachment
▸
1 x gooseneck attachment
▸
1 x working light attachment
▸
1 × lithium ion battery
▸
1 x USB cable
▸
1 × power adapter
▸
1 x transport case
▸
1 × manual
▯
Inserting the Li-ion Battery
1. Unscrew the end cap
8
from the housing
5
. Pay attention that
the sealing ring
6
between the end cap
8
and housing
5
does
not slip.
2. Insert the Li-ion battery
7
in the housing
5
ensuring it is
properly aligned.
3. Screw the end cap
8
back on the housing
5
.
The torch only fulfils the requirements of the type of protection
specified when the sealing ring
6
between the end cap
8
and
housing
5
is inserted correctly.
The torch is now ready for use.
Charging the Li-ion Battery
If the Li-ion battery charge drops below 10%, the press switch
4
lights up red.
1. Remove the plastic cover from the USB port
1
.
2. Connect the USB cable
1
to the USB port
1
on the torch and
the power adapter
1
.
3. Plug the power adapter
1
into a power socket.
During the charging process, the USB port
1
lights up red.
The USB port
1
lights up green when the Li-ion battery is fully
charged.
The torch only fulfils the requirements of the type of protection
specified when the USB port
1
is closed properly by the plastic
cover.
▯
Operating the Torch
The torch can operate in two operating modes which are selected
by pressing the press switch
4
.
The switching cycle of the operating modes is as follows:
Operating mode 1
è
Operating mode 2
è
Off
Operating
mode 1
Energy-save mode (50% intensity)
Operating
mode 2
Maximum brightness (100% intensity)
Press the press switch
4
as often as necessary until the required
mode is activated.
Focusing Function
The torch attachment
1
and gooseneck attachment
1
are
provided with a continuous adjustment focussing function in the
lamp head. This function can be used to adjust the beam of light
produced, either to enlarge the area illuminated or reduce and
intensify the area illuminated.
1. Slide the torch head away from the housing
5
to focus (concen-
trate) the beam of light.
2. Slide the torch head towards the housing
5
to scatter (enlarge)
the beam of light.
Changing the Attachment
The torch attachment
1
can be exchanged for the gooseneck
attachment
1
or working light attachment
1
.
1. Draw the locking ring
3
towards the housing
5
to release the
latch.
2. Remove the attachment, currently in use, from the housing
5
.
3.
Insert the attachment required in the housing
5
until the
attachment audibly latches in place. The locking ring
3
moves
towards the attachment when latching in place.
The torch only fulfils the requirements of the type of protection
specified when the sealing ring
2
is inserted correctly between
the attachment
1
,
1
or
1
and housing
5
.
Gooseneck Attachment
You can bend the lamp head on the gooseneck attachment
1
to
any position required. The flexible gooseneck enables you to
illuminate areas difficult to access.
Working Light Attachment
The working light attachment
1
can be used to illuminate a work
area. You can align the working light to the work area using the
working light attachment
1
.
Magnet
The magnets
9
enable you to fix the torch on steel surfaces.
▯
Technical Data
Designation
ULG103 LED torch
Main material
Aluminium
Weight (without
battery)
130 g (complete housing)
65 g (torch attachment)
100 g (gooseneck attachment)
85 g (working light attachment)
Dimensions
33.5 x 142 mm (complete housing)
35 x 70 mm (torch attachment)
20 x 415 mm (gooseneck attachment)
35 x 229.5 mm (working light attachment)
G
G
G
G
G
G
G
Battery
1 x type 18650, 3.7 V, 2200 mAh
Illuminant
(not replaceable)
3.3 W CREE LED (torch attachment)
1.6 W CREE LED (gooseneck attachment)
3.6 W COB LED (working light attachment)
Lighting duration
with maximum
brightness (com-
pliant with ANSI
standard)
Approx. 2.5 hours (torch attachment)
Approx. 3 hours (gooseneck attachment)
Approx. 1.5 hours (working light attach-
ment, 100%)
Lighting range
(compliant with
ANSI standard)
Max. 150 metre (torch attachment)
Max. 100 metre (gooseneck attachment)
Max. 25 metre (working light attachment)
Brightness
Max. 280 lumen (torch attachment)
Max. 190 lumen (gooseneck attachment)
Max. 350 lumen (working light attach-
ment)
Service life (LED)
Approx. 50,000 hours
Functions
2 operating modes (energy-save mode
(50%), maximum brightness (100%))
3 attachments with plug connectors (torch,
gooseneck and working light attachments)
Focussing function (only torch and goose-
neck attachments)
Magnet
Type of protection
IP30
▯
Manufacturer
GO Europe GmbH
Zum Kraftwerk 1
D-45527 Hattingen
GERMANY
1
2
6
2
10
2
11
3
4
5
7
8
9
12
13
14
LED Torch
▯
For Your Safety
Read the manual thoroughly and observe the information
contained when using the device. Keep the manual close
by for future reference.
Refer to the information sheet enclosed for important
information on the subjects of safety, disposal, guarantee and
product care.
G
GO Europe GmbH
Zum Kraftwerk 1
45527 Hattingen
GERMANY
11 / 2020
Art.-No. 40414
